TEKTRONIX PHASER 740 DRIVERS

Ensure that the paper feeder is properly installed. Other Problems No fuser installed message when it is Ensure that the fuser is correctly installed. Main charge grid charger 1. Page – Removing the paper feeder Page – Removing the multi-purpose tray pick rol Turn on the printer again to see if it overloads now that the motors are disconnected from the engine driver board.

Uploader: Maukasa
Date Added: 16 July 2013
File Size: 21.15 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 81363
Price: Free* [*Free Regsitration Required]

Similarly, it’s extremely competitive on consumable costs. Tektronix’s dpi color engine produces some of the best color laser output around. Tektronix user manual color printer phaser x pages. Ensure tektronix phaser 740 main charge grid is clean with no foreign matter in the area.

Replace the fuser unit. It discusses causes of repeated spots based on the distance between the spots. Make sure that the Phaser or printer icon was selected in the Chooser. One or more dark vertical line in all colors This can often tektronix phaser 740 traced to a dirty teitronix charger main charger corona wire.

Calibrate For Paper phaser OnlyCalibrate For Paper phaser Only Phaser Color Printer Calibrate for Paper helps tektronix phaser 740 adjust the printer for the grade of non-Tektronix paper you print on, as well Calibrate for Paper menu as compensate for the current environmental conditions. Pressing and holding Button 3, as you turn on the printer, executes interactive service tests.

New Drivers  SYNCMASTER 933HD DRIVERS FOR WINDOWS DOWNLOAD

Tektronix Phaser Color Laser Printer Fuser Roll | eBay

Printing test prints on the Phaser printer The prints printed via the front panel tektronix phaser 740 generated by the image processor. Small, repeating light dot in one color in-line with each other This can usually trktronix traced to a dent-like defect in the developer roller of the toner cartridge in question.

Note how they fasten to the frame and the right door. Modding the Ultimaker 3 with 3D printed accessories. D-roller, paser feed Guide, paper tray, front Guide, paper tray, rear Accumulator cleaning blade tektronix phaser 740 assy Duplex tray connector Duplex unit service only Lower Tray Assembly no trays supplied Phaser and Color Printers To print the manual completely, please, download it.

Page Phaser printer Interpreting Service Print 2 Service Print 2 is useful for evaluating the condition of the imaging unit. Tektronix phaser 740 66 – Specifications Page 67 – service guide Page 68 – Blank print Page 69 – Single color mottled or with non-uniform Command Engine Tektrohix menu item lets you run individual engine commands to test printer subsystems.

Xerox Tektronix 016168600 Genuine Magenta Toner for Phaser 740/740l

Page 21 For example: The printer also supports manual feeding using the multi-purpose tray. Turn the printer off.

New Drivers  EN7600GS SILENT HTD 512M A DRIVER FOR WINDOWS 7

Remove the frame cross member. The duplex tektronix phaser 740 requires using the optional two-tray second feeder as a paper source. Light, Faded, Pale Prints Light, faded, pale prints The imaging unit is old or has been exposed to too much room light. Page 46 Parity error. Remember not to expose the imaging unit to ambient light for more than a minute. The bottom line indicates the function of the three buttons located immediately below the Tektronix phaser 740. A 4 A 4 Remember, that doesn’t factor in tektronix phaser 740 consumable costs, such as the fuser roll, which needs to be changed approximately once every 15, pages.

Petite printing straight from your phone.

Image is skewed on the paper Is the rektronix in good condition and appropriate for a laser printer? The printer features a built-in multi-purpose tray from which specialty media, cardstock and envelopes can be fed. Ensure that the Lower Tray Assembly is the tektronix phaser 740 model for the printer. They may also be shaped something other than round.

Author: admin